View N133I5-L01_4248966.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 1 / 31 version 0.0 tft lcd tentative specification model no.: n133i5 - l01 o?y u@ ?f?? |a ?2? 2007-01-30 19:31:29 cst approve by dept. mgr.(qa ra) ys_lai( ?|?? /54881/52755/43154) department manager(qa ra) accept 2007-01-24 14:22:24 cst approve by director teren_lin( al2k /56910/36064) director accept customer: a pproved by: note: www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 2 / 31 version 0.0 - contents - revision history ------------------------------------------------------- 3 1. general description ------------------------------------------------------- 4 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings ------------------------------------------------------- 5 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics ------------------------------------------------------- 7 3.1 tft lcd module 3.2 backlight unit 4. block diagram ------------------------------------------------------- 10 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment ------------------------------------------------------- 11 5.1 tft lcd module 5.2 backlight unit 5.3 timing diagram of lvds input signal 5.4 color data input assignment 5.5 edid data structure 6. interface timing ------------------------------------------------------- 19 6.1 input signal timing specifications 6.2 power on/off sequence 7. optical characteristics ------------------------------------------------------- 21 7.1 test conditions 7.2 optical specifications 8. precautions ------------------------------------------------------- 25 8.1 handling precautions 8.2 storage precautions 8.3 operation precautions 9. packing ------------------------------------------------------- 26 9.1 carton 9.2 pallet 11. definition of labels ------------------------------------------------------- 28 11.1 cmo module label 11.2 cmo carton labe www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 3 / 31 version 0.0 revision history version date page (new) section description 0.0 jan, 22,?07 all all tentative specification was first issued. www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 4 / 31 version 0.0 1 general description 1.1 overview n133i5 - l01 is a 13.3? tft liquid crystal display module with led backlight unit and 40 pins lvds interface. this module supports 1280 x 800 wxga mode and can display 262,144 colors. the optimum viewing angle is at 6 o?clock direction. the converter module for backlight is built in. 1.2 features - thin and light weight - wxga (1280 x 800 pixels) resolution - 3.3v lvds (low voltage differential signaling) interface with 1 pixel/clock - rohs compliance 1.3 application - tft lcd notebook 1.4 general specificati0ns item specification unit note active area 286.08 (h) x 178.8 (v) mm bezel opening area 289.48 (h) x 182.2 (v) mm (1) driver element a-si tft active matrix - - pixel number 1280 x r.g.b. x 800 pixel - pixel pitch 0.2235 (h) x 0.2235 (v) mm - pixel arrangement rgb vertical stripe - - display colors 262,144 color - transmissive mode normally white - - surface treatment glare, 3h - - 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 303.50 304.00 304.50 mm vertical(v) 202.00 202.50 203.00 mm module size depth(d) --- --- 2.97 mm (1) weight --- 235 245 g (2) weight g (3) note (1) please refer to the attached drawings for mo re information of front and back outline dimensions (2) weight without inverter (3) weight with inverter. www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 5 / 31 version 0.0 2 absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -20 +60 oc (1) operating ambient temperature t op 0 +50 oc (1), (2) shock (non-operating) s nop - 200/2 g (3), (5) vibration (non-operating) v nop - 1.5 g (4), (5) note (1) temperature and relative humidity range is shown in the figure below. (a) 90 %rh max. (ta ?? 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the ambient temperature mean s the temperature of panel surface. note (3) 1 time for x, y, z. for condition (200g / 2ms) is half sine wave, note (4) 10 ~ 500 hz, 30 min / cycle, 1 cycles for each x, y, z axis. note (5) at testing vibration and shock, the fixtur e in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. the fixing condition is shown as below: side mount fixing screw side mount fixing screw stage bracket lcd module gap=2mm a t room tem p erature stora g e relative humidity (%rh) operating temperature (oc) 100 80 60 -20 40 0 20 -40 80 40 60 20 10 90 www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 6 / 31 version 0.0 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage v cc -0.3 +4.0 v logic input voltage v in -0.3 v cc +0.3 v (1) 2.2.2 backlight unit value item min max. unit note led light bar input current (22.4) (29.6) v rms led light bar input current (115.5) (150) ma rms led peak pulse current - (100) ma rms (1), (2) note (1) permanent damage to the device may occur if maximum values are exceeded. function operation should be restricted to the conditions desc ribed under normal operating conditions. note (2) specified values are for lamp (ref er to section 3.2 for further information). www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 7 / 31 version 0.0 3 electrical characteristics 3.1 tft lcd module ta = 25 2 oc value parameter symbol min. typ. max. unit note power supply voltage vcc 3.0 3.3 3.6 v - permissive ripple voltage v rp 50 mv - rush current i rush 1.5 a (2) initial stage current i is 1.0 a (2) white (364) (400) ma (3)a power supply current black icc (424) (460) ma (3)b lvds differential input high threshold v th(lvds) +100 mv (5), v cm =1.2v lvds differential input low threshold v tl(lvds) -100 mv (5) v cm =1.2v lvds common mode voltage v cm 1.125 1.375 v (5) lvds differential input voltage |v id | 100 600 mv (5) terminating resistor r t 100 ohm power per ebl wg p ebl - tbd - w (4) note (1) the ambient temperature is ta = 25 2 oc. note (2) i rush : the maximum current when vcc is rising i is : the maximum current of the first 100ms after power-on measurement conditions: shown as the following figure. test pattern: black r1 (high to low) (control signal) +12v sw q2 c1 1uf vcc +3.3v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input) 470us +3.3v 0v 0.9vcc 0.1vcc vcc i is icc i rush 100ms vcc rising time is 470us www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 8 / 31 version 0.0 note (3) the specified power supply current is under the conditions at vcc = 3. 3 v, ta = 25 2 oc, dc current and f v = 60 hz, whereas a power dissipation check pattern below is displayed. note (4) the specified power are the sum of lcd p anel electronics input power and the inverter input power. test conditions are as follows. (a) vcc = 3.3 v, ta = 25 2 oc, f v = 60 hz, (b) the pattern used is a black and white 32 x 36 checkerboard, slide #10 0 from the vesa file ?flat panel display monitor setup patterns?, fpdmsu.ppt. (c) luminance: 60 nits. (d) the inverter used is provided from sumida. please contact them for detail information. cmo doesn?t provide the inverter in this product. note (5) the parameters of lvds signals are defined as the following figures. active area a. white pattern active area b. black pattern 0v v cm | v id | single ended 0v | v id | v th ( lvds ) v tl ( lvds ) differential www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 9 / 31 version 0.0 3.2 backlight unit ta = 25 2 oc value parameter symbol min. typ. max. unit note led light bar input voltage v l (22.4) (26.4) (29.6) v rms (1), (duty 100%) led light bar input current i l (115.5) (120) (150) ma rms (1), (duty 100%) led current peak i f - - (100) ma rms per ea power consumption p l (2.59) (3.17) (4.44) w (2), i l = 120 ma led life time l bl (10000) - - hrs (3) note (1) led current is measur ed by utilizing a high frequency current meter as shown below: note (2) p l = i l ?? v l note (3) the lifetime of led is defined as the time when it continues to operate under the conditions at ta = 25 ? 2 o c and i = 20 ma(per ea) until one of the following events occurs: (a) when the brightness becomes ?? 50% of its original value. v l i l www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 10 / 31 version 0.0 4 block diagram 4.1 tft lcd module v edid data edid vcc gnd v l clk(+/-) rxin2(+/-) rxin1(+/-) rxin0(+/-) tft lcd panel (1280xr.g.b.x800) data driver ic scan driver ic backlight unit lvds input / timing controller dc/dc converter & reference voltage generator input connector (jae-fi-xb30srl-hf11) light bar fpc edid eeprom clk edid www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 11 / 31 version 0.0 5 input terminal pin assignment 5.1 tft lcd module pin symbol description polarity remark 1 vss ground 2 conntst connector test 3 vdd logic power 3.3v (panel logic, bl logic) 4 vdd logic power 3.3v (panel logic, bl logic) 5 vdd logic power 3.3v (panel logic, bl logic) 6 vedid edid 3.3v power ddc 3.3v power 7 test panel self test 8 clk edid clock ddc clock 9 data edid data ddc data 10 vss ground (panel logic, bl logic) 11 vss ground (panel logic, bl logic) 12 nc no connect 13 rin0- - lvds differential data input (r0-r5, g0) negative 14 rin0+ + lvds differential data input (r0-r5, g0) positive r0~r5,g0 15 vss0 ground-lvds0 16 rin1- - lvds differential data input (g1-g5, b0-b1) negative 17 rin1+ + lvds differential data input (g1-g5, b0-b1) positive g1~g5, b0, b1 18 vss1 ground-lvds1 19 rin2- - lvds differential data input (b2-b5,hs,vs, de) negative 20 rin2+ + lvds differential data input (b2-b5,hs,vs, de) positive b2~b5, de, hsync, vsync 21 vss2 ground-lvds2 22 clk- - lvds differential clock input 23 clk+ + lvds differential clock input lvds level clock 24 vss3 ground-lvds3 25 inv_pwm / r_pwm pwm brightness control / red pwm 26 vss led ground 27 vss led ground 28 vss led ground 29 vss led ground 30 vss led ground 31 nc no connect 32 vbl+ 7v - 20v led power 33 vbl+ 7v - 20v led power 34 vbl+ 7v - 20v led power 35 vbl+ 7v - 20v led power 36 vbl+ 7v - 20v led power 37 conntst connector test 38 reserved green pwm / etc. (smbus clk for dell) 39 reserved blue pwm / etc. (smbus data for dell) 40 vss ground www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 12 / 31 version 0.0 note (1) connector part no.: 20347-040e-20 or equivalent note (2) user?s connector part no: 20345-*40t or equivalent note (3) the first pixel is odd as shown in the following figure. 5.2 timing diagram of lvds input signal in6 in5 in4 in3 in2 in1 in0 in13 in12 in11 in10 in9 in8 in7 in20 in19 in18 in17 in16 in15 in14 g0 r3 r2 r1 r0 r5 r4 b1 g4 g3 g2 g1 b0 g5 de b5 b4 b3 b2 vsync hsync t/7 signal for 1 dclk cycle (t) rxin0 rxin1 rxin2 clk+ www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 13 / 31 version 0.0 5.3 color data input assignment the brightness of each primary color (red, green an d blue) is based on the 6-bit gray scale data input for the color. the higher the binary input, the brighter t he color. the table below provides the assignment of color versus data input. data signal red green blue color r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0)/dark red(1) red(2) : : red(61) red(62) red(63) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0)/dark green(1) green(2) : : green(61) green(62) green(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0)/dark blue(1) blue(2) : : blue(61) blue(62) blue(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 14 / 31 version 0.0 5.4 edid data structure(edid ?1|?t?{ ) the edid (extended display identification data) data formats are to support displays as defined in the vesa plug & display and fpdi standards. byte # (decimal) byte # (hex) field name and comments value (hex) value (binary) 0 0 header 00 00000000 1 1 header ff 11111111 2 2 header ff 11111111 3 3 header ff 11111111 4 4 header ff 11111111 5 5 header ff 11111111 6 6 header ff 11111111 7 7 header 00 00000000 8 8 eisa id manufacturer name (?cmo?) 0d 00001101 9 9 eisa id manufacturer name (compressed ascii) af 10101111 10 0a id product code (n141i3-l05) 26 00100110 11 0b id product code (hex lsb first; n141i3-l05) 14 00010100 12 0c id s/n (fixed ?0?) 00 00000000 13 0d id s/n (fixed ?0?) 00 00000000 14 0e id s/n (fixed ?0?) 00 00000000 15 0f id s/n (fixed ?0?) 00 00000000 16 10 week of manufacture (fixed week code) 0c 00001100 17 11 year of manufacture (fixed year code) 11 00010001 18 12 edid structure version # (?1?) 01 00000001 19 13 edid revision # (?3?) 03 00000011 20 14 video i/p definition (?digital?) 80 10000000 21 15 active area horizontal 30.336cm 1e 00011110 22 16 active area vertical 18.96cm 13 00010011 23 17 display gamma (gamma = ?2.2?) 78 01111000 24 18 feature support (?active off, rgb color?) 0a 00001010 25 19 rx1 rx0 ry1 ry0 gx 1 gx0 gy1 gy0 9f 10011111 26 1a bx1 bx0 by1 by0 wx1 wx0 wy1 wy0 05 00000101 27 1b red-x (rx = ?0.588?) 96 10010110 28 1c red-y (ry = ?0.337?) 56 01010110 29 1d green-x (gx = ?0.315?) 50 01010000 30 1e green-y (gy = ?0.534?) 88 10001000 31 1f blue-x (bx = ?0.152?) 27 00100111 32 20 blue-y (by = ?0.125?) 20 00100000 33 21 white-x (wx = ?0.313?) 50 01010000 34 22 white-y (wy = ?0.329?) 54 01010100 35 23 established timings 1 00 00000000 36 24 established timings 2 00 00000000 37 25 manufacturer?s reserved timings 00 00000000 38 26 standard timing id # 1 01 00000001 39 27 standard timing id # 1 01 00000001 40 28 standard timing id # 2 01 00000001 41 29 standard timing id # 2 01 00000001 www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 15 / 31 version 0.0 42 2a standard timing id # 3 01 00000001 43 2b standard timing id # 3 01 00000001 44 2c standard timing id # 4 01 00000001 45 2d standard timing id # 4 01 00000001 46 2e standard timing id # 5 01 00000001 47 2f standard timing id # 5 01 00000001 48 30 standard timing id # 6 01 00000001 49 31 standard timing id # 6 01 00000001 50 32 standard timing id # 7 01 00000001 51 33 standard timing id # 7 01 00000001 52 34 standard timing id # 8 01 00000001 53 35 standard timing id # 8 01 00000001 54 36 detailed timing description # 1 pixel clock (?71mhz?, according to vesa cvt rev1.1) bc 10111100 55 37 # 1 pixel clock (hex lsb first) 1b 00011011 56 38 # 1 h active (?1280?) 00 00000000 57 39 # 1 h blank (?160?) a0 10100000 58 3a # 1 h active : h blank (?1280 : 160?) 50 01010000 59 3b # 1 v active (?800?) 20 00100000 60 3c # 1 v blank (?23?) 17 00010111 61 3d # 1 v active : v blank (?800 :23?) 30 00110000 62 3e # 1 h sync offset (?48?) 30 00110000 63 3f # 1 h sync pulse width ("32?) 20 00100000 64 40 # 1 v sync offset : v sync pulse width (?3 : 6?) 36 00110110 65 41 # 1 h sync offset : h sync pulse width : v sync offset : v sync width (?48: 32 : 3 : 6?) 00 00000000 66 42 # 1 h image size (?303 mm?) 2f 00101111 67 43 # 1 v image size (?190 mm?) be 10111110 68 44 # 1 h image size : v image size (?303 : 190?) 10 00010000 69 45 # 1 h boarder (?0?) 00 00000000 70 46 # 1 v boarder (?0?) 00 00000000 71 47 # 1 non-interlaced, normal, no stereo, separate sync, h/v pol negatives 18 00011000 72 48 detailed timing description # 2 pixel clock (?58.75 mhz?, according to vesa cvt rev1.1) f3 11110011 73 49 # 2 pixel clock (hex lsb first) 16 00010110 74 4a # 2 h active (?1280?) 00 00000000 75 4b # 2 h blank (?160?) a0 10100000 76 4c # 2 h active : h blank (?1280 : 160?) 50 01010000 77 4d # 2 v active (?800?) 20 00100000 78 4e # 2 v blank (?19?) 13 00010011 79 4f # 2 v active : v blank (?800 : 19?) 30 00110000 80 50 # 2 h sync offset (?48?) 30 00110000 81 51 # 2 h sync pulse width (?32?) 20 00100000 82 52 # 2 v sync offset : v sync pulse width (?3 : 6?) 36 00110110 83 53 # 2 h sync offset : h sync pulse width : v sync offset : v sync width (?48 : 32 : 3 : 6?) 00 00000000 84 54 # 2 h image size (?303 mm?) 2f 00101111 85 55 # 2 v image size (?190 mm?) be 10111110 www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 16 / 31 version 0.0 86 56 # 2 h image size : v image size (?303 : 190?) 10 00010000 87 57 # 2 h boarder (?0?) 00 00000000 88 58 # 2 v boarder (?0?) 00 00000000 89 59 module "a" revision = example: 00, 01, 02, 03, etc. 00 00000000 90 5a detailed timing description # 3 00 00000000 91 5b # 3 flag 00 00000000 92 5c # 3 reserved 00 00000000 93 5d # 3 fe (hex) defines ascii string (model name ?n141i3-l05?, ascii) fe 11111110 94 5e # 3 flag 00 00000000 95 5f # dell p/n "gr551" 1st character (?g?) 47 01000111 96 60 # dell p/n " gr551" 1st character (?r?) 52 01010010 97 61 # dell p/n " gr551" 1st character (?5?) 35 00110101 98 62 # dell p/n " gr551" 1st character (?5?) 35 00110101 99 63 # dell p/n " gr551" 1st character (?1?) 31 00110001 100 64 lcd supplier eedid revision #: "1" 31 00110001 101 65 manufacturer p/n (?n?) 4e 01001110 102 66 manufacturer p/n (?1?) 31 00110001 103 67 manufacturer p/n (?4?) 34 00110100 104 68 manufacturer p/n (?1?) 31 00110001 105 69 manufacturer p/n (?i?) 49 01001001 106 6a manufacturer p/n (?3?) 33 00110011 107 6b manufacturer p/n (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 0a 00001010 108 6c flag 00 00000000 109 6d flag 00 00000000 110 6e flag 00 00000000 111 6f data type tag: fe 11111110 112 70 flag 00 00000000 113 71 smbus value @ 10nits = 31d 1f 00011111 114 72 smbus value @ 17nits = 43d 2b 00101011 115 73 smbus value @ 24nits = 52d 34 00110100 116 74 smbus value @ 30nits = 58d 3a 00111010 117 75 smbus value @ 60nits = 85d 55 01010101 118 76 smbus value @ 100nits = 111d 6f 01101111 119 77 smbus value @ 140nits = 139d 8b 10001011 120 78 smbus value @ 250 nits = 244d f4 11110100 121 79 numbers of lvds recevier chip = 1 01 00000001 122 7a bist enable: yes = '01' no = '00' ("yes") 01 00000001 123 7b (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 0a 00001010 124 7c (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 125 7d (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 126 7e extension flag 00 00000000 127 7f checksum 9f 10011111 www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 17 / 31 version 0.0 5.5 edid siginal specification (1) edid power parameter symbol test condition min. typ. max. unit power supply voltage vcc ? 1.8 ? 5.5 v (2) dc characteristics parameter symbol test condition min typ max unit supply current vcc=5.0v icc read at 100khz ? 0.4 1.0 ma supply current vcc=5.0v icc write at 100khz ? 2.0 3.0 ma standby current isb vin=vcc or vss ? 1.6 4.0 a input leakage current ili vi n=vcc or vss ? 0.1 3.0 a onput leakage current ilo v out=vcc or vss ? 0.05 3.0 a input low level vil ? -0.6 ? vcc x 0.3 v input high level vih ? vcc x 0.7 ? vcc+0.5 v output low level vcc=3.0v vol2 iol=2.1ma ? ? 0.4 v output low level vcc=1.8v vol1 iol=0.15ma ? ? 0.2 v www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 18 / 31 version 0.0 (3) ac characteristics (vcc=1.8~5.5v standard operation mode) parameter symbol min max unit clock frequency, scl f scl ? 400 khz clock pulse width low t low 1.2 ? g s clock pulse width high t high 0.6 ? g s noise suppression time t i ? 50 ns clock low to data out valid t aa 0.1 0.9 g s time the bus must be free before a new transmission can start t buf 1.2 ? g s start hold time t hd.sta 0.6 ? g s start set-up time t su.sta 0.6 ? g s data in hold time t hd.dat 0 ? g s data in set-up time t su.dat 100 ? ns inputs rise time t r ? 0.3 g s inputs fall time t f ? 300 ns stop set-up time t su.sto 0.6 ? g s data out hold time t dh 50 ? ns write cycle time t wr ? 5 ms www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 19 / 31 version 0.0 6 interface timing 6.1 input signal timing specifications the specifications of input signal timing are as the following table and timing diagram . signal item symbol min. typ. max. unit note dclk frequency 1/tc 50 71.1 80 mhz - vertical total time tv 810 823 2000 th - vertical addressing ti me tvd 800 800 800 th - horizontal total time th 1360 1440 1900 tc - de horizontal addressing time thd 1280 1280 1280 tc - input signal timing diagram 6.2 power on/off sequence t h t c dclk t hd t vd t v de de data - power supply for lcd, vcc - lvds interface - power for lamp restart power on power off 50% 50% 0v 0v 10% t6 t5 t4 t3 t2 t1 90% 10% 90% valid data on off off 10% t7 www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 20 / 31 version 0.0 timing specifications: 0.5< t1 ?? 10 msec 0 < t2 ?? 50 msec 0 < t3 ?? 50 msec t4 ? 500 msec t5 ? 200 msec t6 ? 200 msec note (1) please avoid floating state of interface signal at invalid period. note (2) when the interface signal is invalid, be sure to pull down the power supply of lcd vcc to 0 v. note (3) the backlight inverter power must be turned on after the power supply for the logic and the interface signal is valid. the backlight inverter power must be turned off before the power supply for the logic and the interface signal is invalid. note (4) sometimes some slight noise shows when lcd is turned off (even backlight is already off). to avoid this phenomenon, we suggest that the vcc falling time had better to follow t7 ? 5 msec www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 21 / 31 version 0.0 7 optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 3.3 v input signal according to typical val ue in "3. electrical characteristics" led light bar input current i l 120 ma the measurement methods of optical characteristic s are shown in section 7.2. the following items should be measured under the test conditions describ ed in section 7.1 and stable environment shown in note (6). 7.2 optical specifications item symbol condition min. typ. max. unit note contrast ratio cr (350) (500) - (2), (5) t r - (9) (14) ms response time t f - (16) (21) ms (3) average luminance of white l ave (250) (300) cd/m 2 (4), (5) white variation w (1.5) - (5), (6) rx (0.613) - red ry (0.358) - gx (0.363) - green gy (0.544) - bx (0.156) - blue by (0.144) - wx 0.313 - color chromaticity white wy x =0 , y =0 viewing normal angle typ (-0.05) 0.329 typ (+0.05) - x + (50) (60) horizontal x - (50) (60) y + (40) (50) viewing angle vertical y - cr 10 (50) (60) deg. (1) www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 22 / 31 version 0.0 note (1) definition of viewing angle ( x, y): note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l 63 / l 0 l 63 : luminance of gray level 63 l 0 : luminance of gray level 0 cr = cr (5) cr (x) is corresponding to the contrast ratio of the point x at figure in note (6). note (3) definition of response time (t r , t f ): 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x ? x + y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o 100% 90% 10% 0% gray l evel 63 gray l evel 0 gray l evel 63 time t f optical response t r 66.67 ms 66 . 6 7 m s www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 23 / 31 version 0.0 note (4) definition of average luminance of white (l 5p ): measure the luminance of gray level 63 at 5 points l 5p = [l (5)+ l (10)+ l (11)+ l (12)+ l (13)] / 5 l (x) is corresponding to the luminance of the point x at figure in note (6) note (5) measurement setup: the lcd module should be stabilized at giv en temperature for 20 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. cs-1000t 500 mm lcd module lcd panel center of the screen light shield room (ambient luminance < 2 lux) usb2000 www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 24 / 31 version 0.0 note (6) definition of white variation ( w 5p , w 13p ): measure the luminance of gray level 63 at 5, 13 points w 5p ={1-{ minimum [l (5)+ l (10)+ l (11)+ l (12)+ l (13)] / maximum [l (5)+ l (10)+ l (11)+ l (12)+ l (13)]}} *100% w 13p ={1-{ minimum [l (1) ~ l (13)] / maximum [l (1) ~ l (13)]}} *100% note (7) definition of color gamut (c.g): c.g= ? r g b / ? r 0 g 0 b 0 ,*100% r 0 , g 0 , b 0 : color coordinates of red, green, and blue defined by ntsc, respectively. r, g, b : color coordinates of module on 63 gray leve ls of red, green, and blue, respectively. ? r 0 g 0 b 0 : area of triangle defined by r 0 , g 0 , b 0 ? r g b: area of triangle defined by r, g, b c ie 19 31 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 0.2 0.4 0.6 0.8 r g b r 0 g 0 b 0 www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 25 / 31 version 0.0 8 precautions 8.1 handling precautions (1) the module should be assembled into the system fi rmly by using every mounting hole. be careful not to twist or bend the module. (2) while assembling or installing modules, it can only be in the clean area. the dust and oil may cause electrical short or damage the polarizer. (3) use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and assembly process. (4) do not press or scratch the surface harder than a hb pencil lead on the panel because the polarizer is very soft and easily scratched. (5) if the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. do not use ketone type materials (ex. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride. it might permanently damage the polarizer due to chemical reaction. (6) wipe off water droplets or oil immediately. staining and discoloration may occur if they left on panel for a long time. (7) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contacting with hands, legs or clothes , it must be washed away thoroughly with soap. (8) protect the module from static electricity, it may cause damage to the c-mos gate array ic. (9) do not disassemble the module. (10) do not pull or fold the lamp wire. (11) pins of i/f connector should not be touched directly with bare hands. 8.2 storage precautions (1) high temperature or humidity may reduce the perfo rmance of module. please store lcd module within the specified storage conditions. (2) it is dangerous that moisture come into or co ntacted the lcd module, because the moisture may damage lcd module when it is operating. (3) it may reduce the display quality if the ambient te mperature is lower than 10 oc. for example, the response time will become slowly, and the starting voltage of lamp will be higher than the room temperature. 8.3 operation precautions (1) do not pull the i/f connector in or out while the module is operating. (2) always follow the correct power on/off sequence when lcd module is connecting and operating. this can prevent the cmos lsi chips from damage during latch-up. (3) the startup voltage of backlight is approximately 1000 volts. it may cause electrical shock while assembling with inverter. do not disassemble the mo dule or insert anything into the backlight unit. www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 26 / 31 version 0.0 9 packaging 9.1 carton figure. 10-1 packing method www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 27 / 31 version 0.0 9.2 pallet figure. 10-2 packing method www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 28 / 31 version 0.0 10 definition of labels 10.1 cmo module label the barcode nameplate is pasted on each module as illustrati on, and its definitions are as following explanation. (a) model name: n133i5 - l01 (b) revision: rev. xx, for example: a1, ?, c1, c2 ?etc. (c) serial id: x x x x x x x y m d x n n n n (d) production location: made in xxxx. xxxx stands for production location. (e) ul/cb logo: ?leoo? especially stands for pan el manufactured by cmo ningbo satisfying ul/cb requirement. ?leoo? is the cmo?s ul factory code for ningbo factory. serial id includes the information as below: (a) manufactured date: year: 1~9, for 2001~2009 month: 1~9, a~c, for jan. ~ dec. day: 1~9, a~y, for 1 st to 31 st , exclude i , o and u (b) revision code: cover all the change (c) serial no.: manufacturing sequence of product 10.2 cmo carton label (a) production location: made in xxxx. xxxx stands for production location. n133i5 - l01 year, month, date cmo internal use revision serial no. cmo internal use cmo internal use www.datasheet.co.kr datasheet pdf - http://www..net/
doc. no.: issued date: jan 22, 2007 model no.: n133i5 - l01 tentative 29 / 31 version 0.0 10.3 carton label pkg id (3s)124161241729112345609886c20 box qty 20 made in taiwan vendor id loc id 12416 12416 rev.a06 mfg id 70896 dp/n 03j849 10.4 pallet label from :cmo corporation tainan, taiwan 744 r.o.c to:dell computer 2128 west braker austin tx p.o.number 12345678 dell p/n 12345 country of origin tw packing list# 1234567890123 packing list qty 654321 destination mas loc 60 destination location b4 airbill number 12345678901234567890 pkg cnt 999 of 999 12345 box cnt revision a00-00 apr 29,2003 ship date part description xxxxxxxxxxxxxxxxxxxxxxxxx 12345678901234567890123456789012345678901 www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of N133I5-L01

	To Download N133I5-L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .